Top 10 Best Tie Rod Removal Tool [2022]

Last Update:

Are you looking for the Best Tie Rod Removal Tool. You are in the right place. Our team went through about 72932 reviews available online for Tie Rod Removal Tool. We chose the finest ones, and prepared this list for you.

Comparison Chart of Top 10 Tie Rod Removal Tool

Best Tie Rod Removal Tool
Disclaimer: As An Amazon Associate We Earn From Qualifying Purchases.
NoProductScoreAction
1Inner Tie Rod Tool9.8Buy On Amazon
2Orion Motor Tech 5pc Ball Joint Separator9.6Buy On Amazon
3Cal-Van Tools 946 Low Profile Inner Tie Rod Tool9.6Buy On Amazon
4Orion Motor Tech 5-in-1 Ball Joint Separator9.4Buy On Amazon
5OEMTOOLS 27178 Master Inner Tie Rod Tool Set9.2Buy On Amazon
6Toolwiz Universal Inner Tie Rod Hex Wrench Repair Removal Tools 27-42mm for Car Truck Vehicle Motorcycle9.2Buy On Amazon
7ABN Universal Ball Joint Separator – Remover Tool for Separating Arms9.2Buy On Amazon
8Powerbuilt Inner Tie Rod Remover Tool for Ford9.2Buy On Amazon
9Powerbuilt 648692 Tie Rod Puller - 2 Piece Press Screw8.8Buy On Amazon
10GEARWRENCH 5 Pc. Front End Service Set - 416908.8Buy On Amazon

Tie Rod Removal Tool Reviews

We have checked about 72932 reviews for tie rod removal tool. It was quite difficult to shortlist the ideal ones from thousands of variants online. However, we've tried our best to make sure that you get only the best one from our suggestions.

Table Of Content:

1. Inner Tie Rod Tool

  • Practical: the 3/8″ Inner Tie Rod Tool turns smooth tie rods easily and remove inner tie rods without removing the outer tie rod.
  • Compatibility: fit for all standard tie rods with smooth cylinder ends; Work on any rod that fits between the 3″ top and bottom components with both 9/16″ nuts screwed on and tightened.
  • Easy to use: simply slide tool over the end and tighten collar to allow access with a 3/8″ drive extension; adapters can be used for larger breaker bars/extensions.
  • Strong grip: tool teeth grip the tie rod securely as you plug in a socket wrench or breaker bar and turn these smooth tie rod ends.
  • Convenient: design with compact/low profile means no bulky tool to store; Best tool for servicing inner tie rods to easily remove, repair and installation.

2. Orion Motor Tech 5pc Ball Joint Separator

  • ALL IN ONE FRONT END SERVICE KIT: Containing 5 adjustable tools for a wide range of domestic and import vehicles.
  • HARDENED ALLOY CONSTRUCTION: Extraordinarily tough and durable alloy means these tools can stand up to the toughest jobs.
  • UNIVERSALLY COMPATIBLE WITH A WIDE RANGE OF VEHICLES: The versatile design allows this tool to be used as a pitman arm remover, ball joint separator, or tie rod end puller for many small, domestic rear-wheel-drive vehicles, import vehicles, and light trucks.
  • PROFESSIONAL PORTABLE ABS CASE: The custom-molded case is crafted from high-quality ABS hard plastic for the amateur or professional mechanic on the go.
  • ORION MOTOR TECH PROMISE: If any issues from our tools arise please don’t hesitate to contact us.

3. Cal-Van Tools 946 Low Profile Inner Tie Rod Tool

  • Turns smooth tie rods easily
  • Simply slide tool over the end and tighten collar to allow access with an extension
  • Can remove Inner tie rod without removing the outer tie rod
  • No more bulky tool to store
  • Inexpensive and effective way to turn these smooth tie rod ends

4. Orion Motor Tech 5-in-1 Ball Joint Separator

  • ALL IN ONE FRONT END SERVICE KIT: Containing 5 adjustable tools for a wide range of domestic and import vehicles.
  • HARDENED ALLOY CONSTRUCTION: Extraordinarily tough and durable alloy means these tools can stand up to the toughest jobs.
  • UNIVERSALLY COMPATIBLE WITH A WIDE RANGE OF VEHICLES: The versatile design allows this tool to be used as a pitman arm remover, ball joint separator, or tie rod end puller for many small, domestic rear-wheel-drive vehicles, import vehicles, and light trucks.
  • PROFESSIONAL PORTABLE ABS CASE: The custom-molded case is crafted from high-quality ABS hard plastic for the amateur or professional mechanic on the go.
  • ORION MOTOR TECH PROMISE: If any issues from our tools arise please don’t hesitate to contact us.

5. OEMTOOLS 27178 Master Inner Tie Rod Tool Set

  • INNER TIE ROD REMOVAL TOOL SET: This tie rod kit Includes 12 sizes of crowfoot-style adapters: 1-3/16″, 1-1/4″, 1-5/16″, 1-3/8″, 1-7/16″, 1-1/2″ and 29 mm, 32.
  • ULTRA DURABLE: Tie rod puller tool’s crowfoot adapters are nickel plated for durability; Work the inner tie rod tool kit on your tierod end with the confidence that your tie rod set won’t bend or break during use; Get the most from our tie rods tool.
  • WIDELY USEFUL INNER TIE ROD TOOL: Be sure you have an inner tie rod kit that can easily reach your inner tie rod without removing the rack and pinion; Tube handle inner diameter is 2.
  • USE A RATCHET OR BREAKER BAR: Properly torque the inner tie rod remover on the tie rod end without hassle; Tie rod end puller’s 1/2 Inch drive tube handle makes it easy to remove and re-install tie rod ends; Tie rod puller kit gives you proper reach.
  • EFFORTLESS ORGANIZATION: OEM Tools inner tie rod tool can be taken anywhere easily; Tie rod end removal tool comes in a blow mold case for easy organization; The inner tie rod end tool is portable for use on tie rod inner ends on your family’s fleet.

6. Toolwiz Universal Inner Tie Rod Hex Wrench Repair Removal Tools 27-42mm for Car Truck Vehicle Motorcycle

  • Toolwiz inner tie rods tool is designed specifically for the removal of the direction of the steering rod.
  • This inner tie rods tool is suitable for tie rods between 27mm and 42mm in diameter
  • Easily removes inner tie rod ends without removing rack and pinion
  • Specially designed to be used with 1/2″ square drive tools
  • Universal fits for various vehicles including compatible with Mercedes, Benz, BMW, Toyota, Honda, Ford and more.

7. ABN Universal Ball Joint Separator – Remover Tool for Separating Arms

  • Practical: The ABN Universal Ball Joint Separator – Remover Tool for Separating Arms, Tie Rods, and Ball Joints on Cars, Trucks, ATVs is designed specifically for quick and easy separation of a vehicle’s ball joint from the spindle support arm.
  • Versatile: Universal; For use on both American domestic and European imported/foreign vehicles; For cars, trucks, and even ATVs.
  • Durable: Constructed from commercial-strength cast steel with hardened steel pivot pin and jackscrew for regular shop use.
  • Easy to Use: Slip the forked end between the boot and metal attachment point, be sure the pivot finger is squarely on the threaded end, and tightening the bolt until you have a good amount of resistance; Tap the attachment point and or the finger with a hammer and tighten some more and tap again; When the stud comes loose, it will be all at once as the tool falls free and you will hear a “pop”.
  • Specifications: 1-1/8″ and 2-1/8″ (30mm and 56mm) maximum opening capacity; Accepts 3/4″ sockets or wrenches; 4/5″ (20mm) fork opening; 9/10” (48mm) adjustable height; Can be adjusted to 2 sizes for wider working areas and to accommodate various sizes and vehicles; Scissors-type design.

8. Powerbuilt Inner Tie Rod Remover Tool for Ford

  • Made to be the most reliable tools in the market today
  • Tool solutions for most all situations
  • Built to exceed tool standards
  • Designed for removing the inner tie rod
  • Includes 1-5/16 inches, 1-3/16 inches and 1-71/6 inches adapters
  • Storage case includes laminated instruction sheets with photos

9. Powerbuilt 648692 Tie Rod Puller – 2 Piece Press Screw

  • Tie rod/ball joint separator
  • Separates the tie Rod Ends
  • Made of drop forged heat treated chrome vanadium steel for strength
  • Made from quality materials
  • Durable and long lasting
  • For separating tie rod ends
  • Drop forged and heat treated chrome vanadium steel for strength
  • Fine threaded center screws for maximum torque
  • Two different length center screws to fit a wider range of vehicles

10. GEARWRENCH 5 Pc. Front End Service Set – 41690

  • Allows for easy removal of the most popular types of pitman arms, tie rods, and ball joints
  • Includes pitman arm puller
  • Includes ball joint separator
  • Includes tie Rod End puller
  • Includes Blow mold case for storage and organization

Tie Rod Removal Tool Buying Guide


Does the thought of finding a great Tie Rod Removal Tool stress you out? Has your mind been juggling between choices when it comes to buying Tie Rod Removal Tool in general, specifically regarding which model to choose?
If that’s the case, know that you’re not alone. Many people find it tough to buy the perfect Tie Rod Removal Tool for themselves. We understand the stress associated with the buying process!
Since you’re here, you are obviously curious about Tie Rod Removal Tool Reviews. You’ve been bombarded with information, so you need to find a reputable source with credible options before you make any decisions on which product would be best for your needs.
There are many sources that’ll provide you with that information- buying guides or ratings websites, word-of-mouth testimonials from friends or family members, online forums where users share their personal experiences, product reviews specifically found all over the internet and YouTube channels. Only thorough research will ensure that you get the right product.
But that’s not always easy, right? That's why we've taken time to compile a list of the best Tie Rod Removal Tool in today's market, on your behalf, so that there will be no more worries for you.
How did we come up with the list, you ask? How did we create this buying guide?
  • First, our algorithms collected as much information available about these products from trusted sources.
  • We employed both Artificial Intelligence and large data volume to validate all collected information.
  • Then our AI ranked them on their quality-to-price ratio using industry-standard criteria that let us pick the best Tie Rod Removal Tool currently on the market!
The products aren’t chosen randomly. We consider several criteria before assembling a list. Some of the criteria are discussed below-
  1. Brand Value: What happens when you go for a not-so-reputable brand just because the price seems cheap? Well, the chance of getting a short-lasting product goes higher. That’s because the renowned brands have a reputation to maintain, others don’t.
Top Tie Rod Removal Tool brands try to offer some unique features that make them stand out in the crowd. Thus hopefully, you’ll find one ideal product or another in our list.
  1. Features: You don’t need heaps of features, but useful ones. We look at the features that matter and choose the top Tie Rod Removal Tool based on that.
  2. Specifications: Numbers always help you measure the quality of a product in a quantitative way. We try to find products of higher specifications, but with the right balance.
  3. Customer Ratings: The hundreds of customers using the Tie Rod Removal Tool before you won’t say wrong, would they? Better ratings mean better service experienced by a good number of people.
  4. Customer Reviews: Like ratings, customer reviews give you actual and trustworthy information, coming from real-world consumers about the Tie Rod Removal Tool they used.
  5. Seller Rank: Now, this is interesting! You don’t just need a good Tie Rod Removal Tool, you need a product that is trendy and growing in sales. It serves two objectives. Firstly, the growing number of users indicates the product is good. Secondly, the manufacturers will hopefully provide better quality and after-sales service because of that growing number.
  6. Value For The Money: They say you get what you pay for. Cheap isn’t always good. But that doesn’t mean splashing tons of money on a flashy but underserving product is good either. We try to measure how much value for the money you can get from your Tie Rod Removal Tool before putting them on the list.
  7. Durability: Durability and reliability go hand to hand. A robust and durable Tie Rod Removal Tool will serve you for months and years to come.
  8. Availability: Products come and go, new products take the place of the old ones. Probably some new features were added, some necessary modifications were done. What’s the point of using a supposedly good Tie Rod Removal Tool if that’s no longer continued by the manufacturer? We try to feature products that are up-to-date and sold by at least one reliable seller, if not several.
  9. Negative Ratings: Yes, we take that into consideration too! When we pick the top rated Tie Rod Removal Tool on the market, the products that got mostly negative ratings get filtered and discarded.

These are the criteria we have chosen our Tie Rod Removal Tool on. Does our process stop there? Heck, no! The most important thing that you should know about us is, we're always updating our website to provide timely and relevant information.
Since reader satisfaction is our utmost priority, we have a final layer of filtration. And that is you, the reader! If you find any Tie Rod Removal Tool featured here Incorrect, irrelevant, not up to the mark, or simply outdated, please let us know. Your feedback is always welcome and we’ll try to promptly correct our list as per your reasonable suggestion.
Tags: Automotive , Tools & Home Improvement