Top 10 Best Headers For Ford 302 [2022]

Last Update:

Are you looking for the Best Headers For Ford 302. You are in the right place. Our team went through about 38349 reviews available online for Headers For Ford 302. We chose the finest ones, and prepared this list for you.

Comparison Chart of Top 10 Headers For Ford 302

Best Headers For Ford 302
Disclaimer: As An Amazon Associate We Earn From Qualifying Purchases.
NoProductScoreAction
1Rareelectrical NEW HIGH TORQUE MINI STARTER COMPATIBLE WITH FORD MUSTANG 302 351 5.0L AUTOMATIC TRANSMISSIONS9.6Buy On Amazon
2Remflex 3003 Exhaust Gasket for Ford V8 Engine9.6Buy On Amazon
3Stage 8 8933 1" Locking Header 12 Point Bolt kit for Ford Small Block9.4Buy On Amazon
4BBK 1575 1-5/8" Premium Exhaust Header Gaskets Kit for Ford 302/3519.2Buy On Amazon
5BBK 1577 Ford 302/351 Exhaust Header Bolt Kit for Ford - 16 Piece 3/8"9Buy On Amazon
6Flowtech Small Block Ford Turbo Headers 1-3/4 304Ss Nat9Buy On Amazon
7BBK 1511 1-5/8" Shorty Tuned Length Performance Exhaust Headers for Ford Mustang 351W - Chrome Finish8.8Buy On Amazon
8BLACKHORSE-RACING Tri-Y Stainless Steel Exhaust Headers Manifold Pipe Set with Gasket Compatible with 1964-1970 Ford Mustang 260 289 302 351W8.4Buy On Amazon
9SUPERFASTRACING Tri-Y Exhaust Headers Replacement for 1964-1970 Ford Mustang 260 289 302 Stainless Steel8.4Buy On Amazon
10Flowtech 99253RFLT Header Gasket8.4Buy On Amazon

Headers For Ford 302 Reviews

We have checked about 38349 reviews for headers for ford 302. It was quite difficult to shortlist the ideal ones from thousands of variants online. However, we've tried our best to make sure that you get only the best one from our suggestions.

Table Of Content:

1. Rareelectrical NEW HIGH TORQUE MINI STARTER COMPATIBLE WITH FORD MUSTANG 302 351 5.0L AUTOMATIC TRANSMISSIONS

  • 100% NEW and Made with the Highest Quality Components Available
  • Full One Year Warranty
  • Computer tested for consistent Quality and unsurpassed reliability.
  • Starter – Voltage: 12V Rotation: Clockwise Teeth On Drive / Splines: 10 Source: Aftermarket

2. Remflex 3003 Exhaust Gasket for Ford V8 Engine

  • 1-1/8 inch width x 1-1/2″ height Stock Square Port; Ford V8 – 302 (’81-’95), 351 (’69-’97) Windsor, 1-1/8″ x 1-1/2″ Square Port, Manifold or Headers, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials; Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.

3. Stage 8 8933 1″ Locking Header 12 Point Bolt kit for Ford Small Block

  • Grade 8 bolts will not stretch when hot
  • Duplex nickel finish for a superior look and corrosion resistance
  • Double hex head includes 3/16 inches recessed allen head for easy installation
  • Removable and reusable
  • Can visually inspect; no need to put a wrench on to check tightness

4. BBK 1575 1-5/8″ Premium Exhaust Header Gaskets Kit for Ford 302/351

  • BBK is your Number One Aftermarket Performance Brand in the USA – American Designed and Built
  • Premium Graphite Material Ensures Leak Free Seal Every Time
  • Port Matched For Optimum Flow of All 1-5/8 Exhaust Headers
  • Designed for Higher Temperature Performance Applications
  • Sold as a Pair

5. BBK 1577 Ford 302/351 Exhaust Header Bolt Kit for Ford – 16 Piece 3/8″

  • BBK is your Number One Aftermarket Performance Exhaust Brand in the USA – American Designed and Built.
  • This SB Ford Exhaust Header Bolt Kit is the Same one included in all BBK SB Ford Exhaust Header Kits
  • Fits all 302 351 Applications – Includes 16Pcs 3/8 X 3/4 Bolts
  • Zinc Coated to Prevent Rust
  • Made in the USA

6. Flowtech Small Block Ford Turbo Headers 1-3/4 304Ss Nat

  • Available with 1-3/4” or 1-7/8” mandrel bent primary tubes and 3” collectors with merge spears for increased exhaust velocity.
  • 3/8” thick header flanges for a leak-free seal
  • 3” V-band flanges and clamps included
  • Premium header gaskets and bolts included
  • Durable and long lasting

7. BBK 1511 1-5/8″ Shorty Tuned Length Performance Exhaust Headers for Ford Mustang 351W – Chrome Finish

  • BBK is your Number One Aftermarket Performance Exhaust Brand in the USA – American Designed and Built.
  • BBK Exhaust is Built with CNC Mandrel Bent Tubing for 35% Increased Flow Over Stock to Add Horsepower and Improve Torque and Performance.
  • Aircraft Quality Construction, Heavy Gauge 1-5/8″ Tubing, 3/8″ Laser Cut Flanges, Large Bore Patented Designed Collectors and Custom Precision Hand and Robotic Welds for Long Lasting Quality.
  • Direct “Perfect” Fit Replacement Exhaust Includes All New Gaskets and Hardware and Offers Improved Performance and Sound Over Restrictive Stock Systems.
  • Bolt on 12-18 HP with these 351 Swap BBK Unequal Length Shorty Exhaust Headers Fit all 1986-1993 Ford Mustang 351W Applications – Custom Nickel Chrome Finish.

8. BLACKHORSE-RACING Tri-Y Stainless Steel Exhaust Headers Manifold Pipe Set with Gasket Compatible with 1964-1970 Ford Mustang 260 289 302 351W

  • Compatible with: 64-70 Ford Mustang 260/ 289/ 302(EXCEPT 1965 Ford Mustang,1968 Ford Mustang Base)
  • Package including: 1 X Set of Header Exhaust System, Gasket(s) and Bolt(s) as shown in the Picture above (ALL if any is necessary for Installation).
  • Made of High Quality T304 Stainless Steel Material
  • 1.5″ Primary Tube, 2.5″ Collector
  • Increase High Flow Air, Instantly Gain 10 -15 Hp. / Tq.

9. SUPERFASTRACING Tri-Y Exhaust Headers Replacement for 1964-1970 Ford Mustang 260 289 302 Stainless Steel

  • Header Exhaust System, Reducers, Bolts and Metal Gasket Included.
  • Size: 1.
  • Function: Increase High Flow Air, Instantly Gain 10 -15 Hp. / Tq.
  • Fitment: 1964-1970 For-d Mustang 260/ 289/ 302(EXCEPT 1965 For-d Mustang,1968 For-d Mustang Base)
  • Note: Will not fit GT-40P heads or AOD transmission, 1967-70 Manual transmission cars require additional driver’s side header clearance around steering box.

10. Flowtech 99253RFLT Header Gasket

  • Water/Weather Resistant
  • Re-Useable
  • Multi-Layer “Dead Soft” aluminum conforms to create a leak-proof seal
  • Will Not Burn Or Blow Out
  • Suitable For Port-Matching

Headers For Ford 302 Buying Guide


Does the thought of finding a great Headers For Ford 302 stress you out? Has your mind been juggling between choices when it comes to buying Headers For Ford 302 in general, specifically regarding which model to choose?
If that’s the case, know that you’re not alone. Many people find it tough to buy the perfect Headers For Ford 302 for themselves. We understand the stress associated with the buying process!
Since you’re here, you are obviously curious about Headers For Ford 302 Reviews. You’ve been bombarded with information, so you need to find a reputable source with credible options before you make any decisions on which product would be best for your needs.
There are many sources that’ll provide you with that information- buying guides or ratings websites, word-of-mouth testimonials from friends or family members, online forums where users share their personal experiences, product reviews specifically found all over the internet and YouTube channels. Only thorough research will ensure that you get the right product.
But that’s not always easy, right? That's why we've taken time to compile a list of the best Headers For Ford 302 in today's market, on your behalf, so that there will be no more worries for you.
How did we come up with the list, you ask? How did we create this buying guide?
  • First, our algorithms collected as much information available about these products from trusted sources.
  • We employed both Artificial Intelligence and large data volume to validate all collected information.
  • Then our AI ranked them on their quality-to-price ratio using industry-standard criteria that let us pick the best Headers For Ford 302 currently on the market!
The products aren’t chosen randomly. We consider several criteria before assembling a list. Some of the criteria are discussed below-
  1. Brand Value: What happens when you go for a not-so-reputable brand just because the price seems cheap? Well, the chance of getting a short-lasting product goes higher. That’s because the renowned brands have a reputation to maintain, others don’t.
Top Headers For Ford 302 brands try to offer some unique features that make them stand out in the crowd. Thus hopefully, you’ll find one ideal product or another in our list.
  1. Features: You don’t need heaps of features, but useful ones. We look at the features that matter and choose the top Headers For Ford 302 based on that.
  2. Specifications: Numbers always help you measure the quality of a product in a quantitative way. We try to find products of higher specifications, but with the right balance.
  3. Customer Ratings: The hundreds of customers using the Headers For Ford 302 before you won’t say wrong, would they? Better ratings mean better service experienced by a good number of people.
  4. Customer Reviews: Like ratings, customer reviews give you actual and trustworthy information, coming from real-world consumers about the Headers For Ford 302 they used.
  5. Seller Rank: Now, this is interesting! You don’t just need a good Headers For Ford 302, you need a product that is trendy and growing in sales. It serves two objectives. Firstly, the growing number of users indicates the product is good. Secondly, the manufacturers will hopefully provide better quality and after-sales service because of that growing number.
  6. Value For The Money: They say you get what you pay for. Cheap isn’t always good. But that doesn’t mean splashing tons of money on a flashy but underserving product is good either. We try to measure how much value for the money you can get from your Headers For Ford 302 before putting them on the list.
  7. Durability: Durability and reliability go hand to hand. A robust and durable Headers For Ford 302 will serve you for months and years to come.
  8. Availability: Products come and go, new products take the place of the old ones. Probably some new features were added, some necessary modifications were done. What’s the point of using a supposedly good Headers For Ford 302 if that’s no longer continued by the manufacturer? We try to feature products that are up-to-date and sold by at least one reliable seller, if not several.
  9. Negative Ratings: Yes, we take that into consideration too! When we pick the top rated Headers For Ford 302 on the market, the products that got mostly negative ratings get filtered and discarded.

These are the criteria we have chosen our Headers For Ford 302 on. Does our process stop there? Heck, no! The most important thing that you should know about us is, we're always updating our website to provide timely and relevant information.
Since reader satisfaction is our utmost priority, we have a final layer of filtration. And that is you, the reader! If you find any Headers For Ford 302 featured here Incorrect, irrelevant, not up to the mark, or simply outdated, please let us know. Your feedback is always welcome and we’ll try to promptly correct our list as per your reasonable suggestion.
Tags: Automotive